Home > Optional Accessories > MagVise Magnetic Workholding
Optional Accessories
MagVise Magnetic Workholding
  1. Feature
         
Features :
1. 1. Super power magnetic force 1,250kgf±5%/100 cm2 。 (4 Poles)
2. Control each working face for ON and OFF, so it can be load and unload the workpiece on each working face.
3 seconds control for power ON and OFF.
3. Without any obstructed movement of cutters during machining. Can be use all the functions of CNC 4 Axic Index Device completely.
 
Applications :
1. Suitable in use for combine with CNC 4 Axic Index Device.
2. Minimum thickness of workpiece required:10㎜.
3. Minimum size of workpiece required as 4 alternate magnetic square poles and above is necessary for optimum clamping.
 
Specification & Dimension:(Custom-made is available.):
Please provide :
1. Design of CNC 4 axis index device system
2. Location and size of orientating cylinder
3. Dimension of cable adapter in order to design our EEPM connector.
EEPM-CIT2F:with 2 magnetic working face, can be clamp 2 workpiece for machining.
Suitable for bigger workpiece machining.
   
EEPM-CIT2F2T:with 2 magnetic working face and 2 T-slot working face, can be clamp both of magnetic and non-magnetic material of workpiece machining. Suitable for smaller workpiece machining.
   
EEPM-CIT4FT:with 4 magnetic working face and T-slots available. Suitable for smaller workpiece machining.
   
   
Working Example
   
Top
PRODUCTS